Skip to content
HomeServicesWiring & Rewiring

Whole-Home Wiring & Rewiring on Oahu

Code-perfect rewires, panel-to-outlet runs, and junction-level repairs across Aiea, Honolulu, Kailua, and Kaneohe.

Wiring & Rewiring

Old Wires Out. New Wires In.

Your home’s wiring is the nervous system behind every light switch, outlet, and appliance. When it’s 30+ years old (common in Aiea and central Honolulu) or nicked from a prior remodel, you start seeing the signs — flickering lights, warm outlets, breakers that trip for no reason, or appliances that feel underpowered. None of that is normal, and most of it is fixable in a single visit.

Sparky and Sons handles the full spectrum of residential wiring work — from a single dead circuit you need traced and replaced, to a whole-home rewire that brings your 1960s plantation home up to current NEC and City & County of Honolulu code. We pull permits, coordinate with HECO when a temporary disconnect is needed, and label every breaker so you (or the next homeowner) never have to guess.

We use modern THHN/THWN copper, Romex where appropriate, and AFCI/GFCI breakers wherever code requires. No knob-and-tube, no aluminum branch wiring left in place, and no “we’ll just splice this” shortcuts. If we wouldn’t put it in our own home, it doesn’t go in yours.

Sparky and Sons electrician completing whole-home rewire in an Honolulu, Hawaii home

What’s Included

Every wiring & rewiring job covers the same scope — here’s exactly what you’re getting when you book us.

Whole-home rewiresOld plantation homes, mid-century rebuilds, and post-renovation cleanups.
Branch circuit replacementReplace a single bad run from panel to outlet without tearing into walls unnecessarily.
Aluminum-to-copper retrofitsAlumiConn or COPALUM connectors at every termination, code-compliant.
Knob-and-tube removalSafely de-energize, remove, and replace pre-1960s wiring still found in older homes.
AFCI/GFCI upgradesCode-required arc-fault and ground-fault protection for bedrooms, kitchens, baths.
Hidden splice repairFind that buried junction box behind drywall and bring it back to code.

How It Works

Four steps from first call to written warranty. No surprises along the way.

01

Walk & Quote

We walk your home, test what’s suspect, and write a plain-English quote on the spot. Free.

02

Permits & Plan

Pull City & County permits, schedule HECO if needed, lay out the wire route.

03

Clean Install

Drop cloths, shoe covers, low dust. We work neat and respect your home.

04

Test & Warranty

Every circuit tested under load, every breaker labeled, written warranty signed.

Why Sparky

Code Compliant

City & County of Honolulu code, NEC standards, AFCI/GFCI where required. Permitted.

Minimal Wall Damage

We pull where we can, fish where we must. Patch list given before we start.

Same-Day Quotes

Free written quote on the first visit. No three-day email wait.

Frequently Asked Questions

Do I need to rewire if I have aluminum wiring?
Not always. AlumiConn or COPALUM connectors at every termination satisfy code in many cases. We’ll inspect and tell you straight whether it’s a connector job or a full rewire.
How long does a whole-home rewire take?
Most three-bedroom homes finish in 4–7 working days. We work in zones so you keep power in part of the house every night.
Will you patch the drywall after?
We patch any holes we make, taped and sanded. Texture-matching and final paint we leave to your painter (or recommend one).
Do you pull the permit?
Yes — every job that requires a permit gets one in our name. You receive a copy of the inspection sign-off when it passes.

Get a Free Wiring & Rewiring Quote

Written quote on the first visit. No surprise charges, no salesman act — just a licensed electrician answering your questions.

Ready to Get Started?

Contact Sparky and Sons LLC today for a free, no-obligation quote. We look forward to working with you.